Eldes EPIR3 - Page 39

39
39EN
EPIR3 User Manual v1.3
2. After the system is successfully Stay-armed, the keypad’s LED indicator ARMED will light up and the system
will reply with conrmation by SMS text message to User 1 phone number (by default).
EPIR3
SMS
User
72
For more details on how to disarm & turn o the alarm by EKB3W keypad, please refer to section 3.3.4. How to disarm
& turn o alarm by EKB3W.
3.3.6. Alarm indications & how to view violated zones / tampers by EKB3W
EKB3W keys have a LED back-light, which will be activated once any key is pressed. Due to battery power saving
reasons, the back-light and LED light last for 10 seconds after the last key-stroke.
The violated zone number is indicated by illuminated zone indicator or ashing indicator SYSTEM (if the violat-
ed zone number is above 12). The violated tamper number is indicated by ashing zone indicator or illuminated
indicator SYSTEM (if the violated tamper number is above 12). In both cases. the mini-buzzer can be silenced by
disarming the system using any method.
For more details on EKB3W violated high-number zone & tamper number indication, please refer to section 3.3.8.
Fault messages.
The built-in buzzer uses two types of sound signals – three short beeps and one long beep. Three short beeps
stand for successfully carried out conguration command, one long beep – for invalid conguration command. The
buzzer emits short beeps during exit delay. Due to battery saving reasons the buzzer will beep during entry delay
and in case of alarm only if the violated zone is of the associated EKB3W keypad.