Eldes EPIR3 - Page 53

53
53EN
EPIR3 User Manual v1.3
Wireless Device Management
Function Command Value Range / Comment Example
Get wireless de-
vice information
XXXX_RFINFO:Zn
or XXXX_RFINFO:
YYYYYYYY
Zn = [Z3... Z34]
The system will send you a text by return,
with the following information:
• wireless device battery level;
• wireless signal level;
• Test Time value
• rmware version.
1111_
RFINFO:5261841A
Verify wireless
device operation
status
XXXX_TEST:Zn Zn = [Z3... Z34]
The system will send you a text by
return indicating if a wireless device is
operational.
1111_TEST:Z6
Get wireless de-
vice temperature
XXXX_TEMP:Zn Zn = [Z3... Z34]
The system will send you a text by return
indicating temperature value measured
by a built-in temperature sensor (if any)
of a specied wireless device.
1111_TEMP:Z9
SMS Central Number Settings
Function Command Value Range / Comment Example
Verify SMS text
message central
number
XXXX_
SMS_+4411111111
The SMS central number is normally already
saved in the SIM by your mobile phone network
provider. However if you fail to receive SMS
text messages from the EPIR3, you will have
to enter it yourself having rst got it from your
mobile phone provider.
If you continue to have problems communicat-
ing with the SIM card you installed into EPIR3,
try using a SIM card from a dierent mobile
telephone operator.
1111_SMS_
+44255XXXX1