Eldes EPIR3 - Page 54

54
54 EN
EPIR3 User Manual v1.3
ELDES Cloud Services
Function Command Value Range / Comment Example
Get ELDES Cloud
Services ID code
XXXX_SMART_ID The system will send you a text by return, with
the multi-character code required by ELDES
Cloud Services feature.
1111_SMART_ID
Enable ELDES
Cloud Services
XXXX_SMART:ON 1111_SMART:ON
Disable ELDES
Cloud Services
XXXX_SMART:OFF 1111_SMART:OFF
Remote System Restart
Function Command Value Range / Comment Example
Restart system
remotely
XXXX_RESET In some critical situations it
might be necessary to restart
the system, for instance after
changing the GPRS settings.
1111_RESET
Monitoring Station Settings
Function Command Value Range / Comment Example
Enable MS
Mode
XXXX_SCNSET:ON The system can be congured to
report events to the monitoring
station by transmitting data
messages to the monitoring
station. The system connects to
the monitoring station when the
MS (Monitoring Station) mode is
enabled.
1111_SCNSET:ON
Disable MS
Mode
XXXX_SCNSET:OFF 1111_SCNSET:OFF
NOTE: The underscore symbol ‘_’ in these instructions represents a space. So when typing an SMS text
message, replace the underscore symbol with a single space.