Electrolux T4130 - Rotation Settings; Clockwise Rotation Duration; Pause and Reversing Intervals; Anticrease Function Control

34
Program unit
6204
38
6204
37
CONFIG 2
MENU 5-3
ROTATION
MAXIMUM
RESET COUNTERS
ELS NETWORK
CONFIG 3
ROTATION
Select the row ROTATION and press the knob.
The display shows the accessible parameters
regarding the rotation - the default values are listed
to the right:
• CLOCKWISE 5
• PAUSE BETWEEN REV. 3 *
• REVERSING 5 **
• ANTICREASE ON
(For a more detailed description of the functions
see further below.)
* On T4900/41200 the factory setting is 12 sec.
** On machines w/reversing, 1 motor the factory
setting is 15 sec.
To adjust parameter values set the value and
press the knob.
Fig.
38
Fig.
37
ROTATION
MENU 5-3-1
CLOCKWISE
PAUSE BETWEEN REV.
REVERSING
ANTICREASE
EXIT
CLOCKWISE
Select for how long the rotation must be clockwise - only if reversing is ON.
Duration 01 - 99 minutes.
PAUSE BETWEEN REV.
Select how long the pauses between reversings must be - only if reversing is ON.
Duration 01 - 99 seconds.
REVERSING
Select the duration of the reversing - only if reversing is ON. Duration 01 - 99 minutes (on
machines w/reversing, 1 motor the duration is 01- 99 seconds).
ANTICREASE
Select whether the anticrease function must be on or off
0 = OFF
1 = ON