53
E 12 - Drying error with Auto Stop system
Error description
Error code E12 occurs if the Auto Stop system does not register that the clothes are dry
within 90 minutes (factory setting).
Error analysis
Go to step 2.
NO
NO
YES
YES
Check for short
circuit and replace
the fuses and
restart.
Check factory setting for
Auto Stop.
Max drying time.
Menu 5-4-3
Autostop temp.
Menu 5-2-3
Remove some of the
clothes and restart?
NO
YES
Has the heating been
insufficient due to a blown
fuse?
1. Is the air in
dryer cold?
Go to step 2.
2. Is the dryer
overfilled with
clothes?
Resetting
Resetting is done by opening/closing the dryer loading door and pressing the start button
Troubleshooting
To Next Page
Loading...
