Electrolux T4130 - Error E13: Drying Error with Payment System; Error Description and Cause; Error E13 Analysis and Resolution

54
CP ESS
E 13 - Drying error, dryer connected to a payment system
Error description
Error code E13 occurs with Payment systems where the customer or system has
requested a longer drying time than the allowed 90 minutes (factory setting on the dryer).
Error code is not displayed but is registered in the error log.
Error analysis
Incorrect payment system
set-up (max. 90 min.) or
defective PCB.
Check that there are no
errors on the connected
payment system or
harness and correct these.
NO
YES
Is the
connection
between P22
on PCB and the
payment system
disconnected?
1. Which type
of payment
system?
Incorrect payment system
setup (Max. 90 min.)
LM10
Troubleshooting