7
Description
Generel
From factory, the dryer has been set to specifi c values for:
Time, temperature, cooling, reversing, etc.
The above parameters are changeable by reprogramming the Selecta Control PCB.
Selecta Control PCB
The PCB Module is located under the top cover on the front of the machine, see the service
manual for the specifi c dryer.
In order to reprogramme the dryer it is necessary to switch the print board into programming
mode.
Glossary
Auto Stop The tumble dryer stops automatically when the clothes are dry.
AHL Apartment House Laundry - Communal laundries / Housing block laundries.
GN Natural gas
LPG Bottle gas
OPL On Premises Laundry - Institutional laundries.
PCB Printed Circuit Board.
RMC Residual Moisture Control - The tumble dryer has residual moisture control.
CP Central Payment
CMD Coin Meter Double
CMS Coin Meter Single
CMSNCB Coin Meter No Coin Box
ESS Electrolux Single System
PCR Prepared for Card Reader
To Next Page
Loading...
