52
Replace the defective parts.
NO
YES
YES
E 11 - Drying error with RMC
Error description
Error code E11 occurs if the RMC system does not register that the clothes are dry within
90 minutes (factory setting).
The dryer stops automatically when the clothes have the chosen residual moisture.
Error analysis
1. Are P10-1 and
P10-2 connected?
The measuring is
done with an empty
drum.
Resetting
Resetting is done by opening/closing the dryer loading door and pressing the start button
Go to step 2.
Check the wiring
connections, RMC belt on
drum and lifter insulation.
Are they in working
order?
Go to step 3.
NO
NO
YES
YES
Check for short
circuit and replace
the fuses and
restart.
Check factory setting for
max drying time.
Max drying time.
Menu 5-4-3
Remove some of the
clothes and restart?
NO
YES
Has the heating been
insufficient due to a blown
fuse?
2. Is the air in
dryer cold?
Go to step 3.
3. Is the dryer
overfilled with
clothes?
Troubleshooting
To Next Page
Loading...
