ELNA eXplore 340 - Seam Guides on the Needle Plate; Turning a Square Corner

JanomeFlyer.com
44
Seam guides on the needle plate
The seam guides on the needle plate help you to measur
e
seam allowance.
The numbers indicate the distance between the cente
r
needle position and the seam guide.
1 Seam guides
Number 15 20 4/8 5/8 6/8
Spacing (cm) 1.5 2.0 1.3 1.6 1.9
Spacing (inch) (5/8) (3/4) 1/2 5/8 3/4
Turning a squa
r
e corne
r
The cornering guide helps you maintain a 5/8” (1.6 cm
)
seam allowance when sewing a corner.
When the fabric edge facing you lines up wi
t
h the cornerin
g
guide as illustrated, stop stitching and lower the needle
into the fabric by turning the handwheel toward you.
Raise the presser foot and pivot the fabric so the edge of
the fabric will align with the 5/8” (1.6 cm) seam guide.
Lower the presser foot and start stitching in the ne
w
direction.
2 Cornering guide
Elna 320-340 Sewing Machine Instruction Manual
www.janomeflyer.com
320-340 Owners Manual/ User Guide