Elvaco CMeX50 - Change Hexdump Baud

CMeX50 Users Manual English
CMeX50 Users Manual English
page | 36 (89)
2017-10-13
Document id: 1090055 Version 1.5
5.6.10 Change Hexdump baud
Select menu choice 10. Hexdump baud using Up/Down keys and press OK key.
In this menu you choose which speed you should send data on the hexdump.
Change between the different baud rates by using the Up/Down keys.
Accept the changes by pressing OK or cancel by pressing the ESC key.