Elvaco CMeX50 - Set Sleep Mode Time; Master to Slave; Slave to Master; Set LCD Menu Password

CMeX50 Users Manual English
CMeX50 Users Manual English
page | 75 (89)
2017-10-13
Document id: 1090055 Version 1.5
0
0xe5
Acknowledge
6.3.25 Set sleep mode time
Set the time before the product enters sleep mode when no user interaction has been taken place in the
LCD menu. The user needs to enter the 4 digit password in the LCD menu to be able to continue
configuration of the product.
6.3.25.1 Master to slave
Byte index
Data
Description
0
0x68
Start character 1
1
0xnn
L-Field 1
2
0xnn
L-Field 2
3
0x68
Start character 2
4
0x43 | 0x53 | 0x63 | 0x73
C-Field = SND_UD
5
0xnn
A-Field = Address of slave
6
0x51
CI-Field = Master to slave data send
7-14(15)
0x017C03656C73nn
OR
0x01FC036E616Cnn
Write sleep mode time
nn = 8 bit unsigned sleep mode in minutes.
Valid range: 0..255
15(16)
0xnn
Checksum
16(17)
0x16
Stop character
6.3.25.2 Slave to master
Byte index
Data
Description
0
0xe5
Acknowledge
6.3.26 Set LCD menu password
Set the LCD menu password which needs to be entered to access the LCD menu. The default password is
0000.
6.3.26.1 Master to slave
Byte index
Data
Description
0
0x68
Start character 1
1
0xnn
L-Field 1
2
0xnn
L-Field 2
3
0x68
Start character 2
4
0x43 | 0x53 | 0x63 | 0x73
C-Field = SND_UD
5
0xnn
A-Field = Address of slave
6
0x51
CI-Field = Master to slave data send