Elvaco CMeX50 - Slave to Master; Set Language; Master to Slave

CMeX50 Users Manual English
CMeX50 Users Manual English
page | 74 (89)
2017-10-13
Document id: 1090055 Version 1.5
3
0x68
Start character 2
4
0x43 | 0x53 | 0x63 | 0x73
C-Field = SND_UD
5
0xnn
A-Field = Address of slave
6
0x51
CI-Field = Master to slave data send
7-13(14)
0x017C0364636Cnn
OR
0x01FC0364636C00nn
Write LCD contrast
nn = 8 bit signed LCD contrast offset.
Valid range: -10 (brightest) .. +10 (darkest)
14(15)
0xnn
Checksum
15(16)
0x16
Stop character
6.3.23.2 Slave to master
Byte index
Data
Description
0
0xe5
Acknowledge
6.3.24 Set language
Set the LCD display language.
6.3.24.1 Master to slave
Byte index
Data
Description
0
0x68
Start character 1
1
0xnn
L-Field 1
2
0xnn
L-Field 2
3
0x68
Start character 2
4
0x43 | 0x53 | 0x63 | 0x73
C-Field = SND_UD
5
0xnn
A-Field = Address of slave
6
0x51
CI-Field = Master to slave data send
7-13(14)
0x017C036E616Cnn
OR
0x01FC036E616Cnn
Write language
nn = 8 bit unsigned language
Valid values:
0 = English
1 = Swedish
2 = German
14(15)
0xnn
Checksum
15(16)
0x16
Stop character
6.3.24.2 Slave to master
Byte index
Data
Description