Elvaco CMeX50 - Reset to Factory Default; Reboot the Product

CMeX50 Users Manual English
CMeX50 Users Manual English
page | 42 (89)
2017-10-13
Document id: 1090055 Version 1.5
5.8 Reset to factory default
Navigate to menu choice 3.4. Factory default and press the OK key. When accepting the question on the
confirm page, the product will restore all configuration to default, remove all meters and reboot.
Reset to factory defaults can also be made using standard M-Bus command Application reset, see chapter
6.3.11.
5.9 Reboot the product
Navigate to menu choice 3.5. Reboot and press the OK key.