66
EMC VNX5500 File Installation Guide
Planning Worksheets
Primary DNS server Auto-discovered (optional). Enter this
information into the Value column of this
table.
Secondary DNS server Auto-discovered (optional). Enter this
information into the Value column of this
table.
NTP server As a Best Practice, EMC recommends that
your Control Stations be configured with
the Network Time Protocol (NTP) service.
The NTP service will be automatically
configured on the Control Station if you
select this box in the GUI.
Time Zone Required
Table 7 Public IP addresses for SP A and SP B
Field Value Comments
SP A IP Address Type the public IP addresses for the storage
processors (SP) you want to use to
communicate with the VNX from the public
network. These IP addresses must be on
the same subnet as the Control Station IP
address and should not be in use by any
other host on the network.
SP B IP Address
Table 8 Passwords
Field Value Comments
root password nasadmin (default) Passwords are default factory values and
should be changed as soon as possible for
security reasons.
Passwords can be changed during the VNX
Installation Assistant for File/Unified
installation process or from within
Unisphere.
nas admin password nasadmin (default)
Table 6 Control Station public LAN settings (continued)
Field Value Comments
To Next Page
