16 100-412-182 REV. 06
2.1 Models Covered
This manual covers the Branson 2000X Micro Actuator. The 2000X Micro Actuator and
Interface Box are designed to be integrated into automated and semi-automated low force
applications that require a small profile actuator. The Actuator and Interface Box may is
found in one configuration:
Actuator and Interface Box alone (not installed in a common support, and so on). Being
designed for automation, this is the usual presentation for this system.
This manual covers this configuration. The 2000X Micro Actuator requires a 2000Xdt
power supply with 11.11 or higher software version to function, and that is covered in
separate manuals and user documents.
Figure 2.1 shows a Branson 2000X Micro Actuator and Interface Box.
NOTICE
The Actuator and Interface Box are a matched set, and must be kept
together. They must not be interchanged with other micro systems.
To Next Page
Loading...
Need help?
General
