100-412-182 REV. 06 33
3.2 Receiving
Branson equipment is carefully checked and packed before dispatch. It is recommended,
however, that you follow the procedure below upon receiving your Micro Actuator and
Interface Box.
Inspect the Actuator when it is delivered
Table 3.2 Receiving
Step Action
1
Check the equipment immediately after delivery to ensure that it has not
been damaged during transport.
2 Verify that all parts are complete according to the delivery note.
3
Determine if any component has become loose during shipping and, if
necessary, tighten screws.
NOTICE
If the goods delivered have been damaged during shipping, please
contact the forwarding agent immediately. Retain packing material
(for possible inspection or for sending back the unit).
CAUTION
The Actuator, Interface Box and the Power Supply may be heavy.
Handling, unpacking, and installation may require the assistance of a
colleague or the use of platforms or hoists.
To Next Page
Loading...
Need help?
General
