100-412-182 REV. 06 iii
Foreword
Congratulations on your choice of a Branson Ultrasonics Corporation system!
The Branson 2000X Series system is process equipment for the joining of plastic parts
using ultrasonic energy. It is the newest generation of product using this sophisticated
technology for a variety of customer applications. This Operating Manual is part of the
documentation set for this system, and should be kept with the equipment.
Thank you for choosing Branson!
Introduction
This manual is arranged into several structured chapters which will help you find the
information you may need to know to safely handle, install, set up, program, operate,
and/or maintain this product. Please refer to the Table of Contents and/or the Index of
this manual to find the information you may be looking for. In the event you require
additional assistance or information, please contact our Product Support department (see
1.4 How to Contact Branson for information on how to contact them) or your local Branson
representative.
To Next Page
Loading...
Need help?
General
