6.2.8 Write protection using TankMaster
™
A Rosemount 2410 can be software write protected to avoid unintentional configuration
changes. Software write protection locks the holding register database.
Procedure
1. Start the Rosemount TankMaster WinSetup program.
2. In the TankMaster WinSetup workspace, select the Logical View tab.
3. Right-click the device icon.
4. Select Write Protect.
5. In the New State drop-down list, select Protected, and then click the Apply button
to save the new write protect state.
Now the holding register database is locked. As long as the device is write protected
no configuration changes can be made.
6. Click the OK button to close the Write Protect window.
Service and troubleshooting Reference Manual
December 2019 00809-0100-2410
88 Reference Manual
To Next Page
Loading...
