Log files
Log files are stored in plain text file format and can be viewed in any word processing
program. They are stored in the following folder: C:\Rosemount\TankMaster\Log,
where C is the disk drive where the Rosemount TankMaster software is installed.
A log file contains the same input registers as the View Diagnostic Registers window, see
View and configure diagnostic registers using TankMaster
™
. You can change which input
registers to be included in the log file by configuring the View Diagnostic Registers window,
see the Rosemount Tank Gauging System Configuration Manual for more information.
Figure 6-4: Log File
Service and troubleshooting Reference Manual
December 2019 00809-0100-2410
98 Reference Manual
To Next Page
Loading...
