5.5.9 Guided setup
The following description shows how to use the Guided Setup in Rosemount Radar Master.
The Guided Setup is useful if you are unfamiliar with the Rosemount 5300 Level
Transmitter.
Procedure
1. Start the Guided Setup.
a) Start Rosemount Radar Master. It automatically presents a list of available
transmitters.
b) Select the desired transmitter. Now the transmitter is connected and the
Guided Setup window appears automatically:
2. In the Guided Setup window, select Run Wizard for guided setup and follow the
instructions. Now you will be guided through a short transmitter installation
procedure.
Note
The Guided Setup is an extended installation guide that includes more than just the
configuration Wizard. It can be disabled by unchecking the Open Guided Setup
dialog after Connect check box in the Application Preferences window (select View
→ Application Preferences, and then select the View Options tab).
3. In the Device Properties window, check that the information complies with the
ordering information.
The Device Properties window presents general information stored in the transmitter
database such as device model, serial number, communication protocol and device
address.
Reference Manual Configuration
00809-0100-4530 April 2019
Reference Manual 129
To Next Page
Loading...
