Emerson Rosemount 5300 Series - Chapter 1 Introduction; Using this Manual

1 Introduction
1.1 Using this manual
This manual provides installation, configuration and maintenance information for the
Rosemount
™
5300 Level Transmitter.
Transmitter overview contains an introduction to theory of operation a and description of
the transmitter. Information on applications, process and vessel characteristic, and a
probe selection guide are also included.
Mechanical installation contains mounting considerations and mechanical installation
instructions.
Electrical installation contains electrical installation instructions.
Configuration provides instructions on configuration of the transmitter using a handheld
communicator, the Rosemount Radar Master software, AMS Device Manager, and
DeltaV
™
.
Operation contains operation techniques such as viewing measurement data and display
functionality.
Service and troubleshooting provides troubleshooting techniques for the most common
operating problems, as well as diagnostic and error messages, and service instructions.
Safety Instrumented Systems (4-20 mA only) contains identification, commissioning,
maintenance, and operations information for safety-certified transmitter used in Safety
Instrumented Systems (SIS) applications.
Specifications and reference data supplies reference and specification data, as well as
ordering information.
Product certifications contains hazardous locations certifications and approval drawings.
Configuration parameters provides extended information about the configuration
parameters.
Advanced configuration provides instructions on how to use the functions Dynamic Vapor
Compensation, Signal Quality Metrics, and Probe End Projection.
Remote mounting contains mechanical installation instructions and configuration for
remote housing.
Level Transducer Block describes the operation and parameters of the Level transducer
block.
Register Transducer Block describes the operation and parameters of the register
transducer block.
Advanced Configuration Transducer Block describes the operation and parameters of the
advanced configuration transducer block.
Resource Transducer Block describes the operation and parameters of the resource
transducer block.
Reference Manual
Introduction
00809-0100-4530 April 2019
Reference Manual 9