Emerson Rosemount 5300 Series - Canada

Special Conditions for Safe Use (X):
1. WARNING – Potential Electrostatic Charging Hazard – The enclosure contains non-
metallic material. To prevent the risk for electrostatic sparking the plastic surface
should only be cleaned with a damp cloth.
2. WARNING – The apparatus enclosure contains aluminum and is considered to
constitute a potential risk of ignition by impact or friction. Care must be taken into
account during installation and use to prevent impact or friction.
Ui Ii Pi Ci Li
FISCO parameters 17.5 V 380 mA 5.32 W 0 0
B.6 Canada
B.6.1 E6 Explosionproof, Dust-Ignitionproof
Certificate
1514653
Standards
CSA C22.2 No.0-M91, CSA C22.2 No.25-1966, CSA C22.2 No.30-M1986,
CSA C22.2 No.94-M91, CSA C22.2 No.142-M1987, CSA C22.2 157-92,
CAN/CSA C22.2 No. 60529:05, ANSI/ISA 12.27.01-2003
Markings
Explosionproof CL I, DIV 1, GP B, C, D; Dust-Ignitionproof CL II, DIV 1 and 2,
GP E, F, G and coal dust, CL III, DIV 1, Type 4X/IP66/IP67
B.6.2 I6 Intrinsically Safe and Non-Incendive Systems
Certificate
1514653
Standards
CSA C22.2 No.0-M91, CSA C22.2 No.25-1966, CSA C22.2 No.30-M1986,
CSA C22.2 No.94-M91, CSA C22.2 No.142-M1987, CSA C22.2 157-92,
CAN/CSA C22.2 No. 60529:05, ANSI/ISA 12.27.01-2003
Markings
CL I, DIV 1, GP A, B, C, D, T4 see installation drawing 9240030-937; Non-
Incendive Class III, DIV 1, Haz-loc CL I DIV 2, GP A, B, C, D, Maximum
Ambient Temperature +60 °C for Fieldbus and FISCO and +70 °C for HART,
T4, Type 4X/IP66/IP67, Maximum Working Pressure 5000 psi, Dual Seal.
Ui Ii Pi Ci Li
Entity parameters HART 30 V 130 mA 1 W 7.26 nF 0
Entity parameters
Fieldbus
30 V 300 mA 1.3 W 0 0
B.6.3 IF FISCO
Certificate
1514653
Reference Manual Product certifications
00809-0100-4530 April 2019
Reference Manual 361