Emerson Rosemount 5300 Series - Page 198

The view/record mode tab
The View/Record Mode tab presents a plot of the current tank conditions. Each radar echo
is displayed as a peak in the signal plot.
When clicking the Echo Curve icon under Device Config/Tools, the Echo Curve Analyzer
window appears with the View/Record Mode tab selected:
Figure 7-11: An Echo Curve Plot in View/Record Mode
A. Record tank spectra
B. Play (continuously updates the spectrum)
Advanced
The Advanced button opens a list below the Echo Curve plot with information about all
echoes in the tank such as signal amplitude and position in the tank.
Play
When the Play button is clicked, the tank spectrum is continuously updated without being
stored.
Record tank spectra
This function allows you to record tank spectra over time. This can be a useful function if,
for example, you want to study the tank signal when filling or emptying the tank.
The file mode tab
The File Mode tab lets you open files with saved snapshots/movies to be presented in the
spectrum plot. A movie file can be played to view the amplitude plot at the desired update
rate.
Service and troubleshooting Reference Manual
April 2019 00809-0100-4530
198 Rosemount 5300 Level Transmitter