Emerson Rosemount 5300 Series - Page 284

Blocks and execution time
Block Execution time
1 Resource N/A
3 Transducer N/A
6 Analog Input (AI) 10 ms
1 Proportional/Integrate/Derivate (PID) 15 ms
1 Signal Characterizer (SGCR) 10 ms
1 Integrator (INT) 10 ms
1 Arithmetic (ARTH) 10 ms
1 Input Selector (ISEL) 10 ms
1 Control Selector (CS) 10 ms
1 Output Splitter (OS) 10 ms
FOUNDATION Fieldbus class (basic or Link Master)
Link Master (LAS)
FOUNDATION Fieldbus instantiation
Yes
Conforming FOUNDATION
™
Fieldbus
ITK 6.0.1
FOUNDATION Fieldbus alerts
• Field diagnostics alerts
• Plantweb
™
alerts
A.2.5
Modbus
®
(output option code M)
Output
The RS-485 Modbus version communicates by Modbus RTU, Modbus ASCII, and
Levelmaster protocols.
8 data bits, 1 start bit, 1 stop bit, and software selectable parity.
Baud Rate
1200, 2400, 4800, 9600 (default), and 19200 bits/s
Address Range
1 to 255 (default device address is 246)
HART communication is used for configuration via the HART terminals or tunneling via the
RS-485.
Specifications and reference data Reference Manual
April 2019 00809-0100-4530
284 Rosemount 5300 Level Transmitter