Emerson Rosemount 5400 Series - 10 Guided Setup

92
Reference Manual
00809-0100-4026, Rev HA
Section 5: Basic Configuration/Start-up
November 2014
Basic Configuration/Start-up
5.4.10 Guided setup
The following description tells how to use the RRM Guided Setup. The corresponding HART
commands (Field Communicator Fast Key Sequence) are also shown. The Guided Setup is useful
for those unfamiliar with the Rosemount 5400 Series transmitter.
Guided Setup and Configuration Wizard
1. Start the RRM program. RRM automatically
presents a list of available transmitters. Select
the desired transmitter. The transmitter is now
connected and the Guided Setup window
appears.
2. In the Guided Setup window, select the Run
Wizard... button and follow the instructions
through a short transmitter installation
procedure.
Device Properties
3. The first window in the Configuration Wizard
presents general information that is stored in the
transmitter database, such as device model,
serial number, antenna type, communication
protocol, and device address.
Verify that the information matches the ordering
information.
Run Wizard
Note
The Guided Setup is an extended installation
guide including more than just the
configuration Wizard. It can be disabled by
de-selecting the Open Guided Setup dialog
after Connect check-box in the Application
Preferences window (menu option View >
Application Preferences).