Emerson Rosemount 5400 Series - Process Connections; A.4.6 Process Connections

205
Reference Manual
00809-0100-4026, Rev HA
Appendix A: Reference data
November 2014
Reference Data
A.4.6 Process connections
Standard flanges
Figure A-19. Cone and Rod Antennas (Model Code: 2S-8S and 1R-4R)
Figure A-20. Cone Antennas with Protective Plate (Model Code: 2H-8H, 2M-8M, and
2N-8N)
Figure A-21. Process Seal Antennas
Designation Mating standard Face style
(1)
(1) Face gasket surface is serrated per mating standard.
Face surface finish Material
ANSI ASME B16.5 0.06 in. raised face R
a
= 125-250 ì in 316 / 316L
EN (DIN) EN 1092-1 2 mm raised face (Type B1) R
a
= 3.2-12.5 ì m EN 1.4404
JIS JIS B2220 2 mm raised face R
a
= 3.2-6.3 ì m EN 1.4404
Designation Mating standard Face style
(1)
(1) Face gasket surface is serrated per mating standard.
Face surface finish Material
ANSI ASME B16.5 0.06 in. raised face R
a
= 125-250 ì in 316 / 316L
EN (DIN) EN 1092-1 Flat face (Type A) R
a
= 3.2-12.5 ì m EN 1.4404
JIS JIS B2220 2 mm raised face R
a
= 3.2-6.3 ì m EN 1.4404
Designation Standard Style Material
ANSI ASME B16.5 Slip-on 316 / 316L
EN (DIN) EN 1092-1 Slip-on (Type 01) EN 1.4404
JIS JIS B2220 Slip-on plate (SOP) EN 1.4404