Emerson Rosemount 5400 Series - Installation Procedure

21
Reference Manual
00809-0100-4026, Rev HA
Section 3: Mechanical Installation
November 2014
Mechanical Installation
3.2 Installation procedure
Follow these steps for proper installation:
Review installation
considerations
(see page 22)
Mount the transmitter
(see page 36)
Wire the transmitter
(see page 43)
Make sure covers and
cable/conduit
connections are tight
Power up the
transmitter
Configure the
transmitter
(see page 73)
Verify measurements
Ground the housing
(see page 46)