100
Reference Manual
00809-0100-4026, Rev HA
Section 5: Basic Configuration/Start-up
November 2014
Basic Configuration/Start-up
5.4.11 Using the Setup functions
Use the Setup function if you are already familiar with the configuration process for the
Rosemount 5400 Series transmitter or to change the current settings:
Figure 5-11. Setup Functions in RRM
1. Start the RRM software.
2. In the RRM workspace, choose the
appropriate icon for configuring
transmitter parameters:
Guided Setup: this dialog guides
you through the most important
steps to perform a successful
configuration of the device. The
guide consists of a few steps.
Wizard: guides the user through
the basic configuration
procedure of the Rosemount
5400 transmitter
General: configures general
settings, such as measurement
units and communication
parameters, and which LCD
variables to display
Tank: configures tank geometry,
tank environment, and volume
Output: configures Analog
Output
Echo Curve: disturbance echo
handling
Advanced: advanced
configuration
General
Echo Curve
Advanced
Wizard
Analog Output
Tank geometry,
Environment,
Volume
Guided Setup
To Next Page
Loading...
