Emerson Rosemount 5400 Series - Page 278

266
Reference Manual
00809-0100-4026, Rev HA
Appendix F: Register transducer block
November 2014
Register Transducer Block
UPDATE_EVT 7 This alert is generated by any change to the static data.
BLOCK_ALM 8
The block alarm is used for all configuration, hardware,
connection failure, or system problems in the block. The
cause of the alert is entered in the subcode field. The first
alert to become active will set the Active status in the
Status parameter. As soon as the Unreported status is
cleared by the alert reporting task, another block alert
may be reported without clearing the Active status, if the
subcode has changed.
TRANSDUCER_DIRECTORY 9 0
Directory that specifies the number and starting indices
of the transducers in the transducer block.
TRANSDUCER_TYPE 10 0x8080(0x8080) Identifies the transducer.
XD_ERROR 11 A transducer block alarm subcode.
COLLECTION_DIRECTORY 12 0
A directory that specifies the number, starting indices,
and DD Item IDs of the data collections in each transducer
within a transducer block.
TRANSDUCER_TYPE_VER 13 769 Transducer type version = 0x0301
RB_PARAMETER 14 0 Reserved. RB parameter
INP_REG_1_TYPE 15 Register type
INP_REG_1_FLOAT 16
If the register contains a float value, it shall be displayed
here
INP_REG_1_INT_DEC 17
If the register contains a DWORD value and dec is chosen,
it shall be displayed here
INP_REG_2_TYPE 18 Register type
INP_REG_2_FLOAT 19
If the register contains a float value, it shall be displayed
here
INP_REG_2_INT_DEC 20
If the register contains a DWORD value and dec is chosen,
it shall be displayed here
INP_REG_3_TYPE 21 Register type
INP_REG_3_FLOAT 22
If the register contains a float value, it shall be displayed
here
INP_REG_3_INT_DEC 23
If the register contains a DWORD value and dec is chosen,
it shall be displayed here
INP_REG_4_TYPE 24 Register type
INP_REG_4_FLOAT 25
If the register contains a float value, it shall be displayed
here
INP_REG_4_INT_DEC 26
If the register contains a DWORD value and dec is chosen,
it shall be displayed here
INP_REG_5_TYPE 27 Register type
INP_REG_5_FLOAT 28
If the register contains a float value, it shall be displayed
here
INP_REG_5_INT_DEC 29
If the register contains a DWORD value and dec is chosen,
it shall be displayed here
INP_REG_6_TYPE 30 Register type
INP_REG_6_FLOAT 31
If the register contains a float value, it shall be displayed
here
INP_REG_6_INT_DEC 32
If the register contains a DWORD value and dec is chosen,
it shall be displayed here
INP_REG_7_TYPE 33 Register type
INP_REG_7_FLOAT 34
If the register contains a float value, it shall be displayed
here
Parameter
Index
number
Default value Description