Emerson Rosemount 5400 Series - Page 280

268
Reference Manual
00809-0100-4026, Rev HA
Appendix F: Register transducer block
November 2014
Register Transducer Block
DB_REG_7_INT_DEC 65
If the register contains a DWORD value and dec is chosen,
it shall be displayed here
DB_REG_8_TYPE 66 Register type
DB_REG_8_FLOAT 67
If the register contains a float value, it shall be displayed
here
DB_REG_8_INT_DEC 68
If the register contains a DWORD value and dec is chosen,
it shall be displayed here
DB_REG_9_TYPE 69 Register type
DB_REG_9_FLOAT 70
If the register contains a float value, it shall be displayed
here
DB_REG_9_INT_DEC 71
If the register contains a DWORD value and dec is chosen,
it shall be displayed here
DB_REG_10_TYPE 72 Register type
DB_REG_10_FLOAT 73
If the register contains a float value, it shall be displayed
here
DB_REG_10_INT_DEC 74
If the register contains a DWORD value and dec is chosen,
it shall be displayed here
RM_COMMAND 75
Used to set what will be read or write from a secondary
master.
RM_DATA 76 Data read/write from secondary master.
RM_STATUS 77 Status read by a secondary master.
INP_SEARCH_START_NBR 78 Search start number for input registers.
DB_SEARCH_START_NBR 79 Search start number for holding registers.
Parameter
Index
number
Default value Description