Reference Manual
00809-0100-4731, Rev FA
April 2003
APEX
™
and APEX Sentry
™
Radar Gauge
www.rosemount.com
Appendix B Product Certificates
Hazardous Locations Certifications . . . . . . . . . . . . . . . . . page B-2
Approval Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-3
Approved Manufacturing
Locations
Rosemount Inc. — Chanhassen, Minnesota, USA
EUROPEAN DIRECTIVE
INFORMATION
The EC declaration of conformity for all applicable European directives for this
product can be found on our website at www.rosemount.com. A hard copy
may be obtained by contacting our local sales office.
ATEX Directive Rosemount Inc. complies with the ATEX Directive.
Flame-Proof enclosure Ex d protection type in
accordance with EN50 018
• Radar Gage with Flame-Proof enclosure type protection shall only be
opened when power is removed.
• Closing of entries in the device must be carried out using the
appropriate EE d metal cable gland and metal blanking plug.
• Do not exceed the energy level, which is stated on the approval label.
European Pressure
Equipment Directive
(PED) (97/23/EC)
Radar gages are SEP or Category I with Explosion-Proof protection and are
outside the scope of PED and cannot be marked for compliance with PED.
To Next Page
Loading...
Need help?
General
