Reference Manual
00809-0100-4731, Rev FA
April 2003
3-23
APEX
™
and APEX Sentry
™
Radar Gauge
Transmitter Variables Right click on the device and select “Configuration Properties” from the menu.
Locate the Transmitter Variables tab and perform the following procedure:
1. Enter the entries in the fields provided. Click Apply.
2. An “Apply Parameter Modification” screen appears, enter desired
information and click OK.
3. After carefully reading the warning provided, select OK.
Figure 3-13. Transmitter
Variables Example
APEX/AMS/APEX_AMS_03A.TIF
To Next Page
Loading...
