Endress+Hauser Analytik Jena Biometra TRIO Series - Operating; Power On Self-Test

Operating Biometra TRIO
30 Version 03_19
6 Operating
6.1 Power On Self-Test
After the instrument is switched on the Biometra TRIO Thermal Cycler passes an initial
self- test (power on self-test). While the instrument passes the test the start screen is
shown
Figure 7 Biometra TRIO start screen
For the power on self-test a log file is created and stored in the Thermal Cycler
memory (see chapter "Power-On-Logfile" p. 87).
6.2 Log in Screen
After the instrument has passed the power on self-test the log in screen is displayed.
The log in screen offers the following functions:
Command
Function
Chapter
LOG IN
Starts the log in dialog.
See chapter 6.3
BLOCK
Shows the current block status. If a block is free a touch
on the button leads to a list of previously used pro-
grams for quick start for the selected sample block (not
user specific before log in).
See chapter 6.5 and
6.6
EN/DE
Changes the language setting for the log in screen.
For user-specific
language settings
see chapter 11.2.1