Endress+Hauser Analytik Jena Biometra TRIO Series - Display Brightness; Touch Screen Calibration

Tools Biometra TRIO
76 Version 03_19
 Copy PCR protocols from the terminal to a selected thermal cycler
 Read device-specific parameters
 Read out thermal cycler error messages
11.1.5 Display brightness
Note: The display brightness can only be edited by users with the right “SYSTEM
CONFIGURATION” activated (see chapter "Edit user" p. 81).
ENABLE A USER TO CONFIGURE THE SYSTEM
CONFIGURATION
The display brightness can be adjusted to the local light conditions. To adjust the
brightness use the corresponding buttons:
DARKER
BRIGHTER
Or use the horizontal slider.
Figure 55 Biometra TRIO display brightness settings screen
11.1.6 Touch screen calibration
Note: The touch screen can only be calibrated by users with the right SYSTEM
CONFIGURATION activated (see chapter "Edit user" p. 81).
ENABLE A USER TO CONFIGURE THE SYSTEM
CONFIGURATION