Endress+Hauser Analytik Jena Biometra TRIO Series - Figure 15 Biometra TRIO Incubation Mode Screen

Biometra TRIO Operating
Version 03_19 37
Note: To set the time to endless use the following button:
ENDLESS TIME
To select a sample block press:
SAMPLE BLOCK 1
SAMPLE BLOCK 2
SAMPLE BLOCK 3
To start the incubation press the [START INCUBATION] button.
START INCUBATION
Figure 15 Biometra TRIO incubation mode screen
During incubation the following commands can be used:
STOP INCUBATION
CHOOSE BLOCK
PAUSE INCUBATION
CONTINUE INCUBATION
SKIP STEP