Biometra TRIO Tools
Version 03_19 77
To calibrate the touch screen follow the instructions and touch the screen at the center
of the displayed circle. The procedure is repeated three times at different positions of
the display. If at the end of the procedure a small cross is shown within the circle the
calibration is successful.
Figure 56 Biometra TRIO touch screen calibration screen
11.1.7 Factory settings
Note: The factory settings tool can only be executed by users with the right SYSTEM
CONFIGURATION activated (see chapter "Edit user" p. 81).
Press the corresponding button and confirm the following security query:
Figure 57 Biometra TRIO security query
By using the factory settings tool all user accounts and programs will be deleted!
Note: Use a backup file (see chapter "Backup" p. 92) to restore the system.
To Next Page
Loading...
