Starting, Copying and Deleting programs Biometra TRIO
52 Version 03_19
8 Starting, Copying and Deleting programs
8.1 Start program
Note: Programs can only be started by users with the right START/STOP PROGRAMS acti-
vated (see chapter "Edit user" p. 81). Additionally the right READ ALL PROGRAMS defines,
if a user is allowed to read all programs or if the access is limited to own programs. A
user who is not allowed to read all programs cannot start programs of others even if
the right START/STOP PROGRAMS is activated.
ENABLE A USER TO START OR STOP PROGRAMS
ENABLE A USER TO READ ALL PROGRAMS OF
OTHER USERS
The Biometra TRIO software offers a quick start function for previously used programs.
The quick start function is described in chapter 6.6. This chapter deals with the start of
stored programs by selecting a program from a user account. To select a program for
start, press the programs button in the Biometra TRIO home screen (see chapter
"Home Screen" p. 32).
The program overview screen opens with the user directory of the logged in user pre-
selected (see Figure 27).
Figure 27 Biometra TRIO program overview screen
Touch the corresponding buttons to select a user directory and a stored program. If the
number of user directories or programs is higher than can be maximal displayed in the
list, the buttons above and below the user and program list can be used to scroll up
and down.
To Next Page
Loading...
