Endress+Hauser Analytik Jena Biometra TRIO Series - Set Date and Time; Figure 49 Biometra TRIO Settings Screen

Biometra TRIO Tools
Version 03_19 71
DATE AND TIME
Set date and time
See chapter 11.1.1
AUTOMATIC USER
LOGOUT
Switch automatic user logout on or off
and time settings
See chapter 11.1.2
BEEPER
Switch beeper on or off
See chapter 11.1.3
NETWORK
Define network settings or list net-
work users
See chapter 11.1.4
DISPLAY BRIGHTNESS
Adjust display contrast
See chapter 11.1.5
TOUCH SCREEN
CALIBRATION
Calibrate touch screen
See chapter 11.1.6
FACTORY SETTINGS
Reset the settings
See chapter 11.1.7
Figure 49 Biometra TRIO settings screen
Press the corresponding button to access the desired function.
11.1.1 Set Date and Time
Note: Date and time can only be edited by users with the right “SYSTEM CONFIGURATION”
activated (see chapter "Edit user" p. 81).
ENABLE A USER TO CONFIGURE THE SYSTEM
CONFIGURATION
The Biometra TRIO software allows the user to set time and date. The date is defined
in day:month:year and the time in hours:minutes:seconds.