Endress+Hauser Analytik Jena Biometra TRIO Series - Quick Start Function

Operating Biometra TRIO
34 Version 03_19
6.6 Quick start function
Note: Programs can only be started by users with the right START/STOP PROGRAMS acti-
vated (see chapter "Edit user" p. 81).
ENABLE A USER TO START OR STOP PROGRAMS
The Biometra TRIO software offers a quick start function for previously used programs.
To use the quick start function, press the block status button in the log in screen (see
chapter "Log in Screen" p. 30) or the home screen (see chapter "Home Screen" p. 32).
Note: The quick start function can only be activated if the current block status is FREE
(see chapter "Quick start function" p. 34). Is the status is RUN or PAUSE a touch of the
button will lead to the program overview screen instead.
If the block status button is used in the log in screen, before a user is logged in, the
software will show a list of latest used programs for quick start for the selected sample
block. This list is not user-specific. If the block button is used in the home screen, after
user log in, the software will show a user specific list of the latest used programs for
quick start for the selected sample block.
LOG IN SCREEN
Latest program list
HOME SCREEN
User specific latest program list
The latest used programs are summarized in a table.
Button
Block Status
Color
Function
Free
Green
Quick start function
Running
Yellow
Program view
Pause
Blue
Program view