Endress+Hauser Levelflex FMP53 - Page 120

Description of device parameters (operating menu) Levelflex FMP51, FMP52, FMP54
120 Endress+Hauser
Description
Defines the empty calibration E.
E is the distance between the reference point
(lower edge of the flange or threaded connection)
and the minimum level (0%).
0%
E
A0013178
Input range
Depending on the selected distance unit and the probe.
Factory setting
Depending on the selected distance unit and the probe.
Full calibration
Navigation
Setup ® Full calibration
Description
Defines the full calibration F.
F is the distance between the minimum level (0%)
and the maximum level (100%).
0%
F
100%
A0013186
Input range
Depending on the selected distance unit and the probe.
Factory setting
Depending on the selected distance unit and the probe.
Level
Navigation
Setup ® Level