Levelflex FMP51, FMP52, FMP54 Accessories
Endress+Hauser 99
Accessory Description
Mounting kit, isolated
A0013586
1 Insulating sleeve
2 Eye-bolt
For reliably insulated fixing of the probe.
Maximum process temperature: 150 °C (300 °F)
For rope probes
4 mm (1/6 in) or 6 mm (1/4 in) with PA>steel:
• Eye-bolt M8 DIN 580
• Diameter D = 20 mm (0.8 in)
• Order-No.: 52014249
For rope probes 6 mm (1/4 in) or 8 mm (1/3 in) with PA>steel:
• Eye-bolt M10 DIN 580
• Diameter D = 25 mm (1 in)
• Order-No.: 52014250
Due to the risk of electrostatic charge, the insulating sleeve is not suitable for use in
hazardous areas. In these cases the fixing must be reliably grounded.
The mounting kit can also be ordered directly with the device (see the Levelflex
product structure, feature 620 "Accessory Enclosed", option PG "Mounting kit,
isolated, rope").
To Next Page
Loading...
