Endress+Hauser Micropilot FMR56 - Page 6

Overview of the operating menu Micropilot FMR50/FMR51/FMR52/FMR53/FMR54/FMR56/FMR57 FOUNDATION Fieldbus
6 Endress+Hauser
Navigation Direct access Description
Expert → System → Administration → Activate SW option
0029 (→  36)
Device reset 1013 (→  36)
Define access code 0 (→  35)
Confirm access code 0 (→  35)
Navigation Direct access Description
Expert → Sensor → Distance unit
0551 (→  38)
Temperature unit 0557 (→  38)
Tank type 1175 (→  38)
Tube diameter 1117 (→  39)
Bin property 1176 (→  39)
Max. filling speed liquid 1212 (→  40)
Max. draining speed liquid 1202 (→  40)
Max. filling speed solid 1214 (→  40)
Max. draining speed solid 1213 (→  41)
Advanced process conditions 1177 (→  41)
Application parameter 1126 (→  42)
Navigation Direct access Description
Expert → Sensor → Medium → Medium type
1049 (→  43)
Medium group 1208 (→  43)
Medium property 1165 (→  44)
Calculated DC value 1118 (→  44)
Navigation Direct access Description
Expert → Sensor → Level → Distance offset
2309 (→  46)
Distance 2231 (→  46)
Empty calibration 2343 (→  47)
Full calibration 2308 (→  48)
Level unit 0576 (→  49)
Level limit mode 2314 (→  50)
High limit 2312 (→  50)
Low limit 2313 (→  51)
Level correction 2325 (→  51)
Output mode 2317 (→  52)
Level 2319 (→  52)
Level linearized 2318 (→  53)
Tank/silo height 1148 (→  53)
Navigation Direct access Description
Expert → Sensor → Linearization → Linearization type
2339 (→  57)
Unit after linearization 2340 (→  58)