Endress+Hauser Micropilot FMR60B - Manufacturer Address; Storage and Transport; Storage Conditions; Transporting the Product to the Measuring Point

Incoming acceptance and product identification Micropilot FMR60B PROFINET with Ethernet-APL
14 Endress+Hauser
4.2.2 Manufacturer address
Endress+Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Place of manufacture: See nameplate.
4.3 Storage and transport
4.3.1 Storage conditions
• Use the original packaging
• Store the device in clean and dry conditions and protect from damage caused by shocks
Storage temperature range
See Technical Information.
4.3.2 Transporting the product to the measuring point
L
WARNING
Incorrect transport!
The housing or sensor can be damaged or pull off. Risk of injury!
‣
Transport the device to the measuring point in its original packaging or by the process
connection.
‣
Always secure lifting equipment (slings, eyes, etc.) at the process connection and never
lift the device by the electronic housing or sensor. Pay attention to the center of gravity
of the device so that it does not tilt or slip unintentionally.