Diagnostics and troubleshooting Micropilot FMR60B PROFINET with Ethernet-APL
58 Endress+Hauser
11.7.2 Filtering the event logbook
Filters can be used to determine which category of event messages is displayed in the
Event list submenu.
Navigation: Diagnostics → Event logbook
Filter categories
• All
• Failure (F)
• Function check (C)
• Out of specification (S)
• Maintenance required (M)
• Information
11.7.3 Overview of information events
Info number Info name
I1000 --------(Device ok)
I1079 Sensor changed
I1089 Power on
I1090 Configuration reset
I1091 Configuration changed
I11036 Date/time set successfully
I11074 Device verification active
I1110 Write protection switch changed
I1151 History reset
I1154 Reset terminal voltage min/max
I1155 Reset electronics temperature
I1157 Memory error event list
I1256 Display: access status changed
I1264 Safety sequence aborted
I1335 Firmware changed
I1397 Fieldbus: access status changed
I1398 CDI: access status changed
I1440 Main electronic module changed
I1444 Device verification passed
I1445 Device verification failed
I1461 Sensor verification failed
I1512 Download started
I1513 Download finished
I1514 Upload started
I1515 Upload finished
I1551 Assignment error fixed
I1552 Failed: Main electronic verification
I1554 Safety sequence started
I1555 Safety sequence confirmed
I1556 Safety mode off
I1663 Power off
To Next Page
Loading...
