Micropilot FMR60B PROFINET with Ethernet-APL Operation options
Endress+Hauser 39
Service interface
A0039148
1 Computer with FieldCare/DeviceCare operating tool
2 Commubox FXA291
3 Service interface (CDI) of the device (= Endress+Hauser Common Data Interface)
To update (flash) the device firmware, the device must be powered via the power
supply terminals.
7.7 FieldCare
7.7.1 Function range
FDT-based plant asset management tool from Endress+Hauser. FieldCare can configure all
smart field devices in a system and helps you manage them. By using the status
information, FieldCare is also a simple but effective way of checking their status and
condition.
Access is via:
• CDI service interface
• PROFINET interface
Typical functions:
• Configuration of transmitter parameters
• Loading and saving of device data (upload/download)
• Documentation of the measuring point
• Visualization of the measured value memory (line recorder) and event logbook
For additional information about FieldCare, see Operating Instructions BA00027S
and BA00059S
7.8 DeviceCare
7.8.1 Function scope
Tool for connecting and configuring Endress+Hauser field devices.
The fastest way to configure Endress+Hauser field devices is with the dedicated
"DeviceCare" tool. Together with the device type managers (DTMs), DeviceCare presents a
convenient, comprehensive solution.
For details, see Innovation Brochure IN01047S
To Next Page
Loading...
