Endress+Hauser Micropilot FMR60B - Ensuring the degree of protection; Post-connection check

Micropilot FMR60B PROFINET with Ethernet-APL Electrical connection
Endress+Hauser 29
Devices with M12 plug
2
1
3
4
A0011175
 7 View of the plug-in connection on the device
1 APL signal -
2 APL signal +
3 Shielding
4 Not assigned
Various M12 sockets are available as accessories for devices with M12 plugs.
6.3 Ensuring the degree of protection
6.3.1 Cable entries
• M20 coupling, plastic, IP66/68 NEMA TYPE 4X/6P
• M20 coupling, nickel-plated brass, IP66/68 NEMA TYPE 4X/6P
• M20 coupling, 316L, IP66/68 NEMA TYPE 4X/6P
• M20 thread, IP66/68 NEMA Type 4X/6P
• G1/2 thread, IP66/68 NEMA Type 4X/6P
If the G1/2 thread is selected, the device is delivered with an M20 thread as standard
and a G1/2 adapter is included with the delivery, along with the corresponding
documentation
• NPT 1/2 thread, IP66/68 NEMA Type 4X/6P
• Dummy plug transport protection: IP22, NEMA TYPE 2
• M12 plug
• When housing is closed and connecting cable is plugged in: IP66/67, NEMA Type 4X
• When housing is open or connecting cable is not plugged in: IP20, NEMA Type 1
NOTICE
M12 plug: Loss of IP protection class due to incorrect installation!
‣
The degree of protection only applies if the connecting cable used is plugged in and
screwed tight.
‣
The degree of protection only applies if the connecting cable used is specified according
to IP67, NEMA Type 4X.
‣
The IP protection classes are only maintained if the dummy cap is used or the cable is
connected.
6.4 Post-connection check
 Are the device or cables undamaged (visual inspection)?
 Do the cables used comply with the requirements?
 Do the mounted cables have strain relief?
 Cable glands mounted, securely tightened and leak-tight?
 Does the supply voltage correspond to the specifications on the nameplate?
 No reverse polarity, terminal assignment correct?
 Cover screwed down correctly?
 Cover lock tightened correctly?