Endress+Hauser Micropilot FMR60B - Recording the Echo Curve; Simulation Submenu

Micropilot FMR60B PROFINET with Ethernet-APL Commissioning
Endress+Hauser 49
9.6 Recording the Echo curve
Record the current Echo curve as a reference echo curve for subsequent diagnostic
purposes
After the measurement has been configured, it is recommended to record the current Echo
curve as a reference echo curve.
The Save reference curve parameter in the Echo curve submenu is used to record the
Echo curve.
Diagnostics → Echo curve → Save reference curve
‣
Under the Save reference curve parameter, activate the Customer reference curve
option
9.7 "Simulation" submenu
Simulation of a process variable, a pulse output or a diagnostic event.