Endress+Hauser Micropilot FMR60B - Diagnostic Event and Event Text; Remedy Informationcalling up; Graphic Display with Keys

Diagnostics and troubleshooting Micropilot FMR60B PROFINET with Ethernet-APL
54 Endress+Hauser
11.3.4 Diagnostic event and event text
The fault can be identified by means of the diagnostic event. The event text helps you by
providing information about the fault. In addition, the associated status symbol is
displayed in front of the diagnostic event.
S
S801 Supply voltage
Diagnostic list
Diagnostics 1
Diagnostics 2
Diagnostics 3
(ID:203)
S801 0d00h02m25s
Increase supply voltage
Supply voltage
1
2
3
4
5
6
7
8
A0051137
1 Diagnostic message
2 Symbol for event level
3 Status signal
4 Short text
5 Symbol for event level, status signal, diagnostic number
6 Remedial measure
7 Service ID
8 Operating time of occurrence
Symbol for event level
 "Alarm" status
Measurement is interrupted. The signal outputs adopt the defined alarm state. A
diagnostic message is generated.
 "Warning" status
The device continues to measure. A diagnostic message is generated.
11.4 Remedy informationCalling up
11.4.1 Graphic display with keys
1 →
X X X X X X XX X
S
i
S801
Menu
Supply voltage
A0051131
‣
Open the Diagnostic list submenu