Endress+Hauser Mycom CLM 152 Operating Instructions

7 Instrument configuration
Note:
The complete menu structure is
illustrated on the back pages of this
manual for an overview.
PARAM
→ Set-up guide
• Guided run through main menus ☞ Chapter 5.2
→ Short operation
• Hold on / off,
• Relay manual mode,
• Limit parameters
• Chemoclean control
☞ Chapter 6.7
→ Instrument data
→ System configuration
• Operating mode, sensor type, 2nd current
output
• Codes for locking
• Output contacts
• General settings
☞ Chapter 7.1
→ Current output
• Parameters for current outputs
• Hold with last value / fixed value
☞ Chapter 7.2
→ Temperature
• Temperature compensation
• Temperature measurement auto. / manual
☞ Chapter 7.3
→ Calibrate
• Parameters for calibration ☞ Chapter 7.4
→ Clean function
• Parameters for clean function ☞ Chapter 7.5
→ Limit
functions
• All subgroups for
limit configuration
☞ Chapter 8
Instrument configuration Mycom CLM 152
34 Endress+Hauser

Endress+Hauser Mycom CLM 152 Specifications

General

Brand	Endress+Hauser
Model	Mycom CLM 152
Category	Transmitter
Language	English