Endress+Hauser Proline Prowirl 73 - Identification; Device Designation

Proline Prowirl 73 Identification
Endress+Hauser 13
2 Identification
2.1 Device designation
The "Proline Prowirl 73" flow measuring system consists of the following components:
• Proline Prowirl 73 transmitter
• Prowirl F or Prowirl W sensor
Two versions are available:
• Compact version: transmitter and sensor form a single mechanical unit.
• Remote version: sensor is mounted separate from the transmitter.
2.1.1 Nameplate of the transmitter and sensor
A0001873
Fig. 1: Nameplate specifications for transmitter and sensor (example)
A = nameplate on transmitter, B = nameplate on sensor (only compact version)
1 Order code/serial number: see the specifications on the order confirmation for the meanings of the individual
letters and digits
2 Power supply: 12 to 36 V DC, power consumption: 1.2 W
3 Available outputs: Current output 4 to 20 mA
4 Observe device documentation
5 Reserved for certificates, approvals and additional information on the device version
6 Nominal diameter
7 Calibration factor
8 Material of measuring tube and seal
9 Fluid temperature range
10 Reserved for information on special products
11 Data regarding Pressure Equipment Directive (optional)
12 Permitted ambient temperature range
13 Degree of protection
PROWIRL 73
ABCDEFGHJKLMNPQRSTTAG No.:
Ser.No.:
12345678901 2007
Order Code:
i
IP67 / NEMA/Type4X
-40°F<Ta<+158°F
Ta+10°C/18°F
73XXX-XXXXXXXXXXX
12-36VDC
3.1
K-factor:
Gasket:
TM:
Materials: CF3M/F316/F316L/1.4404
Graphite
-200°C...+400°C/-328°F...+752°F
1.0000 P/L
Sensor data:
Pat. US 4,743,837 US 6,003,384
Ser.No.: 12345678901
PROWIRL W
pnom = PS= 10bar / p test = 20barSize: DN100
4...20mA, HART
1.2W
-40°C<Ta<+70°C
PED 97/23/EC: Cat. III
A
B
1
11
11
7
9
12
13
1
2
3
6
8
10
Meter Body MB: 25
N12895
Pat. EP 841 545 EP 226 082
Pat. US 4,743,837 US 6,003,384
4
5